EN
2
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 01/2015
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
FixZ-15 Mounting Instructions
n
Defining the area of installation
•
Concentrate the number of fasteners
in the edge and corner zones.
•
Further recommendations are pro-
vided in the structural analysis.
Calculation formula:
e = min (x resp. y or 2
.
h)
Corner zone
Edge zone
Corner zone
Roof center zone
Edge zone
Edge zone
Corner zone
Edge zone
Corner zone
x
y
e/4
e/4
e/10
e/10
e/10
e/10
e/4
e/4
h
a
b
b
a
o
Mounting the fasteners
•
Select corresponding distance be-
tween fasteners
a
for the respective
module. The exact dimensions are
displayed in the Autokalkulator
schematic diagram of your plant
configuration.
•
Please observe shading distances
b
between rows - also visible in the
schematic diagram.
•
The distance between fasteners
c
must comply with the structural
analysis for fasteners - and is also
displayed in the schematic diagram.
•
Further recommendations are pro-
vided in the structural analysis (for
fasteners).
The number of fasteners required is
also dependent upon the properties
of the roof - please verify details with
the manufacturer!
c
Building
c bottom
c top
