EN
1
© Schletter GmbH
•
Gewerbegebiet an der B15
•
Alustraße 1
•
83527 Kirchdorf/Haag i. OB
•
Germany
•
Tel.: +49 8072 9191-200
Fax: +49 8072 9191-9200
•
E-mail: [email protected]
•
www.schletter.eu
•
Updated 08/2012
•
Subject to change without notice
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: [email protected]
FixZ-7 Mounting Instructions
Safety instructions
FixZ-7
Mounting Instructions
System rail upper
End clamp
Middle clamp
System rail lower
Planning, mounting and start-up of the solar plant must be performed by quali
fi
ed personnel only. Poor quality execution can
result in damage to the plant and to the building and can present a risk to people.
Risk of falling! There is a risk of falling when working on the roof as well as when ascending and descending the building. Accident
prevention regulations must be observed and appropriate safety equipment must be used.
Risk of injury! Objects falling from the roof can hurt or even kill people. The danger area around the installation site must be sealed
o
ff
and people close to this area must be warned.
Required tools
Screwdriver with bits:
Bit T40
Bit hex-head SW6
Corresponding tools
for the selected fasteners
The Schletter tool kit comprises
tools required for all standard
systems.
Risk of breakage! PV modules can be damaged if stepped upon.
Risk of electric shock! The mounting and maintenance of the PV modules must be carried out by quali
fi
ed
personnel only. Please observe the all safety regulations issued by the manufacturer!
Fastener (Fix2000 KlickTop)
Additional documentation
Structural analysis
Analysis print-out with schematic diagram
from the plant calculation
