*P516-865*
P516-865
Prepare for Installation
Tools Needed
• Phillips screwdriver
• Tape Measure
• Pencil
Optional
• Flathead Screwdriver
• Wood Block
• Hammer
IMPORTANT NOTES
DO NOT use a power drill for installation!
• Install and test lock with door open to avoid being locked out.
• If tailpiece is not installed,
insert into slot on the back
of the touchscreen and snap
into place.
A
Check door dimensions.
See
schlage.com/faqs-touch
for door preparation
instructions if dimensions are different.
2
³⁄₄
" (70 mm)
OR
2
³⁄₈
" (60 mm)
1
" (25 mm)
Door Edge
2
¹⁄₈
" (53 mm)
Hole
5
¹⁄₂
" (140 mm)
Minimum
B
Adjust bolt length, if necessary.
Measure the dimension shown. If the measurement
is 2
C\v
” (70 mm), extend the bolt.
2
³⁄₈
" (60 mm)
OR
2
³⁄₄
" (70 mm)
No adjustment
needed.
Rotate faceplate
180° to extend.
Extended
Model BE375, Deadbolt
Installation Instructions
Alternate Faceplate
Default Codes
Códigos de predeterminado
Codes du défaut
Place Label Here
Poner la etiqueta aquí
Placer l’autocollant ici
Scan for
programming
information, help,
warranty, and more.
Placa frontal alternativa
Plaque frontale alternative
