Operation
6
Programmer Mode
To get the device into Programmer Mode, the user must click the programmer tab at the top of the application window.
This will change the window to allow the user to program a card or multiple cards.
The user must then specify all of the following options then click the program button.
•
Card Format
•
Facility Code
•
City Code (only in select formats)
•
Badge ID
•
Number to Program (1 is default)
While in programmer mode, the LED will be solid amber. To program the card, simply present the card to the device after
clicking the Program button. A successful card program will be indicated by the LED flashing green once and two beeps.
If more cards are to be programmed, the LED will revert back to solid amber and the badge ID will increment plus one. If
there was only one card to program or the final card was programmed, the LED will flash green and there will be 7 short
beeps.
Î
Î
WhenÎprogrammingÎmultipleÎcardsÎtheÎLEDsÎgoÎAmberÎ(waiting)Î->ÎGreenÎ(SuccessfulÎprogram)Î->ÎRedÎ(veryÎ
quickly)Î->ÎAmberÎ(waitingÎonÎcredential)
Î
Î
TheÎdeviceÎwillÎonlyÎprogramÎXceedIDÎProximityÎcredentials
