Schlage AD-400 Скачать руководство пользователя страница 3

Страница: 3 / 16

AD-400 /AD-401 Networked Wireless Lock User Guide

OVERVIEW

The Schlage AD-400 is an open architecture Wireless Access Point Module (WAPM) designed to
interface with third-party panels through a PIM400.

The Schlage AD-401 is a FIPS-201 certifi ed Wireless Access Point Module (WAPM).

• The AD-400/AD-401 communicates with the PIM400 via RF (radio frequency).

• The AD-400/AD-401 may be battery powered or connected to external power using a UL294 or

ULC S318/ULC S319 listed power supply. See

Batteries

on page 11 or

External Power Supply

page 12 for more information.

• The outside lever is normally locked.

• The inside lever always allows egress.

• The AD-400/AD-401 normally operates in on-line mode. Information contained in the user

credential is passed to an access control panel (ACP), which controls lock functions. The ACP
maintains the audit trail.

Outside

Schlage
Button

Outside
Lever

Keyway

Inside

Inside Push Button (IPB)
Optional

Thumbturn

Inside Lever

Battery Compartment

Keypad

Prox/Smart/Multi-Tech

Reader

AD-400/AD-401-CY

AD-400/AD-401-MS

AD-400/AD-401-MD

AD-400/AD-401-993

Mag Card

(Insert) Reader

Mag Card

(Swipe) Reader

Additional AD-400 Reader options: Mag + Keypad, Prox + Keypad, Smart + Keypad, Multi-Tech + Keypad.

The AD-401 reader is a FIPS-201 certifi ed Multi-Tech + Keypad reader.

Содержание AD-400

















Результаты поиска

Содержание AD-400

Отзывы:

Похожие инструкции для AD-400

Бренды по названию

Популярные бренды

Schlage AD-400, Инструкция по эксплуатации

Результаты поиска

Содержание AD-400

Отзывы:

Похожие инструкции для AD-400

Бренды по названию

Популярные бренды