HOW TO INSTALL THE 04-032 RETROFIT LEVER
04-032 RETROFIT LEVER for “D”
series locksets*
with Orbit, Plymouth or Tulip
design knobs.
*Not for use with interchangeable
core knob designs.
1. REMOVE KNOB
To remove existing knob
from lock unit insert
pointed end of spanner
wrench, or small nail,
into hole in outside knob
sleeve. Exert pressure
and turn key slowly until
knob catch depresses.
Pull off knob.
Remove knob sleeve.
(Sleeve is not used with
retrofit lever.)
2. LEVER/KNOB
INSTALLATION
Place lever in position
onto back of knob (TULIP
design requires spacer
(provided) inserted into
cup of lever.) Position lever
on knob so that end of
lever will point toward
hinge side of door when
knob is reinstalled.
DEPRESS KNOB CATCH
REMOVE KNOB SLEEVE
KNOB SLEEVE
SPACER
RETROFIT LEVER
P509-464
