28
5.2 Accumulation Operation
Place the load on the platform.
Press the
key when the weight displayed is STABLE.
Display will show “ACC 1”, then the total saved value will appear. These displays will be shown for
only three seconds.
Remove the weight from the pan.
When the display returns to zero and stabilises, place the second weight on the scale.
Continue until all weights have been added or the memory is full (99 items).
5.3 Memory Recall
To recall the memory, press the
key.
5.4. Memory Clear
To clear the memory, press the
and
keys together.
5.5 Automatic accumulation
During self checking, press the PRINT key. Go to enter mode. Press TARE key until P2COM appears on
the display, press
key to enter, press
key to select the mode, press
to confirm.
Display shows current RS-232 status, press TARE key and select AUTO. Once AUTO has been set, the
AUTO indicator appears.
Place a weight on the platform. If it is stable, a beep sounds twice. Weight can now be added or
removed. When the weight stabilises, the beep sounds again. Finally, remove all weight from the scale.
The last stable weight is now stored.
6. Parts Counting
To enter parts counting mode, press and hold the
key. Display will show “P 10”.
Press
to change the parts quantity.
Options: p 10 / p 20 / p 50 / p 100 / p 200
6.1 Parts Counting Operation
Select the parts quantity as per the option.
Place the load on the platform.
Press
key to confirm, display will shown “----“ followed by the quantity.
Goods can then be added to the platform. The display will update the parts quantity automatically.
Содержание 4309606
Страница 2: ...2 ...
Страница 33: ...33 Pr 2 Send data to print and accumulation ...
Страница 64: ...64 beschädigt ...
Страница 128: ...128 ...
