Schiller PRO Stand-Aer SA-30A Скачать руководство пользователя страница 8

Страница: 8 / 54

SA-30

MAINTENANCE

CHECK DAILY

Operator Presence Interlock System - Start Operation

For the engine to crank, the parking brake must be ON, and the operator present control lever must be re-

leased in the neutral position. Stand on the operator platform and check, one by one, if the engine will crank

with the parking brake OFF or the operator control lever held down.

Operator Presence Interlock System - Run Operation

In order for the engine to run, the operator must either be standing on the platform, or walking behind the unit

with the platform up, the parking brake in the OFF position and the LH control handle held down out of the

neutral position.

The engine may also run if the parking brake is in the ON position, the LH control handle is rotated up into the

NEUTRAL position.

To check:

1. Start the engine and run at 1/2 throttle.

2. With the LH control handle in the NEUTRAL position rotated up, move the parking brake lever to ON

move the LH control lever down. The engine should kill.

Repair machine before using if the Operator Presence Interlock System does not operate correctly in start or

run. Contact your authorized dealer.

Hardware

Tighten any nuts and bolts found loose. Replace any broken or missing cotter pins. Repair any other

problems before operating.

Tire pressure

Rear Tires should be kept inflated at 15 lbs/in

(1.05kg/cm

). Improper tire inflation can cause rapid tire wear

and poor traction. Uneven inflation can cause uneven aerating. Front tires should be 25 lbs/in

2 .

(1.75 kg/cm²).

Engine Maintenance

-Air Filter: Maintain the air filter according to the manufacturer's engine owners manual.

-Engine Oil: Check engine oil level daily. Top off if necessary. See engine owners manual.

BATTERY-

AGM TYPE BATTERY SUPPLIED

Battery acid is caustic and fumes

are explosive and can cause serious injury or death.

Use insulated tools, wear protective glasses or

goggles and protective clothing when working with

batteries. Read and obey the battery manufacturer’s

instructions.

Be certain the ignition switch is OFF and the key has

been removed before servicing the battery.

1. Verify battery polarity before connecting or dis-

connecting the battery cables.

2. When installing the battery, always assemble

the RED, positive (+) cable first. and the ground,

BLACK, negative (-) cable last.

3. When removing the battery, always remove the

ground, BLACK, negative (-) cable first and the

RED, positive (+) cable last.

4. AGM type battery. Use AGM charger when

charging. P/N 4171973

5. Clean the cable ends and battery posts with steel

wool. Use a solution of baking soda and water

to clean the battery. Do not allow the solution to

enter into the battery cells.

6. Tighten cables securely to battery terminals and

apply a light coat of silicone dielectric grease to

the terminals and cable ends to prevent corro-

sion. Keep terminal covers in place.

Содержание PRO Stand-Aer SA-30A























































Результаты поиска

Содержание PRO Stand-Aer SA-30A

Отзывы:

Похожие инструкции для PRO Stand-Aer SA-30A

Бренды по названию

Популярные бренды

Schiller PRO Stand-Aer SA-30A, Руководство оператора

Результаты поиска

Содержание PRO Stand-Aer SA-30A

Отзывы:

Похожие инструкции для PRO Stand-Aer SA-30A

Бренды по названию

Популярные бренды