10
Maintenance
10.1 Maintenance interval
Page 112
A
rt.
no.
: 0-48-
0227
Rev.:
g
DEFIGARD/PHYSIOGARD Touch 7
10 Maintenance
10.1 Maintenance interval
10.1.1
Maintenance Interval Table
Note
The unit must be serviced on a regular basis. The test results must be recorded and
compared with the values in the accompanying documents.
Maintenance work described in this chapter may be performed by a qualified
technician or by the user according to the Maintenance and Interval Table below.
The following table indicates the intervals and responsibilities of the maintenance
work required. Local regulations in your country may stipulate additional or different
inspection intervals and tests.
Interval
Maintenance
Responsible
Before or after each use,
respectively
Life-saving functions - check the following:
• Visual inspection of the device and accessories (see section
• Switch on the device and make sure that both batteries are
sufficiently charged (see section
.
After every intervention
• Visual inspection of the device and accessories (see section
• Battery check (see section
• Button test (see sections
• Auto Test in the Post intervention menu (see section
User
Monthly
• Functional test charging capacitor (see section
User
Every 12 months
• Measuring and safety checks and inspections according to the
instructions in the service handbook
• NIBP check
• ECG check
• SpO
2
check
• IBP check
• EtCO2 Gas span check
• Defibrillator function check (only
DEFIGARD
®
Touch 7
)
Service staff
authorised by
SCHILLER
Lifed item replacement
The following parts must be checked and replaced if necessary
• Replace the power battery, see section
• Replace the safety cell (see expiring date or when device switches of
immediately when replacing power battery)
• Replace the internal button cell (every 10 years)
• Replace the defibrillation capacitor (if the released energy [Joule]
deviates more than 15 % from the intended value) only
DEFIGARD
®
Touch 7
Service staff
authorised by
SCHILLER
