There are no controls. No, this is not one of those veiled “there is no spoon” references.
Wyrd simply has no controls. Just two lights.
1 Left Light: when this is on, the USB power has been enabled. Or, in English, the switch is on.
Wyrd doesn’t work with the switch off.
2 Right Light: when this is on, a destination USB device, such as a DAC, has been plugged into
the Wyrd. If this isn’t on, you have a bad USB cable or something else is amiss.
Note: you can use WYRD with other USB devices (besides DACs), but don’t expect better printing
or better data to your USB printer or hard drive.
item
WyRd contRoLs
OUTPUT
6VAC
16.200101
1
2
wyrd owner's manual.indd 3
4/10/14 2:38 PM
