Schiit Lokius, Руководство пользователя

Страница: 4 / 8

ABC12300000 XXVAC/XA
AC
IN
1 Balanced Input. Connect your preamp out (or
single source) with high-quality XLR cables. Or
you can use crappy cables (but why)?
2 Single-Ended Input. Connect your preamp
out (or single source) with high-quality RCA
cables. Again, you could use crappy cables, but
why? You don’t have to spend a ton to get good
cables.
3 Balanced Output. Connect to your amp (or
headphone amp) with high-quality XLR cables.
Or, you can connect to your preamp or passive
volume control in a simple system.
GETTING CONNECTED
1
2
3
4
4 Single-Ended Output. Connect to your amp (or
headphone amp) with high-quality RCA cables.
Or, you can connect to your preamp or passive
volume control in a simple system.
5 Power Switch. Turn on the switch. The
protection relay keeps the EQ disengaged for
10-20 seconds, then it will engage with a click.
6 Power Input. Connect the supplied wall-wart
cable to the jack labeled “AC IN.” Do not use any
other wall-wart, or bad things might happen.
(Well, technically, any 14-16VAC, 1-2A adapter is fine, but
note the “VAC,” not “VDC.”)
5 6