Schiit Asgard 3 Modular Continuity, Руководство пользователя

Страница: 5 / 8

4 Preamp Output. Connect these to your powered
monitors or speaker power amplifier with high-
quality RCA cables. If your powered monitors
have XLR inputs, you can use RCA to XLR cables
to connect to them.
5 On-Off Switch. Up is on. Down is off. Nothing
very complicated here.
6 AC Input. Plug the power cord in here. Plug the
other end into an outlet of the correct voltage.
Trying to run a 115V product on 230V will blow
the fuse and generally make for a bad, bad day.
1 Card Input. If you have a module installed, the
input for the module will be here. If you don’t have
a module installed, it will be covered.
2 Ground Lug. If you have a phono card installed,
there will be a ground lug here. You will probably
need to connect it to your turntable ground for
minimum hum.
3 RCA Input. Connect your source here with
high-quality RCA cables. Alternately, you can
use cheapie cables, but if you have a problem,
remember that we’ll ask you to check cables first.
012345678
115VAC 30W
1
2
3 4
5
6
CONNECTIONS