manualshive.com logo in svg

Schiedel TecnoFlex Plus, Руководство по установке

Поделиться
Скачать
Schiedel TecnoFlex Plus Скачать руководство пользователя страница 16

16

Eccentric Increaser 

Plain End to 

TecnoFlex Plus

Adaptor 

Prima Plus to 

TecnoFlex Plus

Adaptor 

Prima Smooth to

TecnoFlex Plus

CE Approved Adaptor Range

*ECCENTRIC INCREASER PLAIN END TO TECNOFLEX 
PLUS

Installed as per Adaptor Plain end to TecnoFlex Plus on p.9

*ADAPTOR PRIMA PLUS TO TECNOFLEX PLUS

Attached to the TecnoFlex Plus and fitted through the closure 
plate as per the adaptors above, the male spigot is pushed 
inside the female socket of the Prima Plus connecting flue 
pipe and the joint secured using a locking band. On high 
temperature applications, no sealant is required between the 
flex and the adaptor, however on condensing applications, 
an acid resistant sealant, such as Rotempo, or equivalent, is 
required to seal this joint. Please contact Schiedel Chimney 
Systems for details.

*ADAPTOR PRIMA SMOOTH TO TECNOFLEX PLUS

Fitted as per the Prima Plus to TecnoFlex Plus adaptor, 
however no locking band is required between the spigot of 
the adaptor and the Prima Smooth connecting flue pipe. No 
sealant is required between the screwfit part of the adaptor 
and the TecnoFlex Plus on high temperature applications.
N.B. Prima Smooth is used only on High Temperature 
applications. For condensing applications Prima Plus must be 
used.

*PUSH FIT ADAPTOR

The TecnoFlex Plus is pushed down between the two walls of 
the adaptor. The screws are then tightened to fasten the flex 
securely in place. The joint is then sealed using fire cement or 
an appropriate high temperature sealant

NOSECONE

The nosecone is fastened to the TecnoFlex Plus by twisting in 
a clockwise direction. A length of rope or string is attached 
to the handle on the nose cone, which is then used to pull the 
TecnoFlex Plus down the chimney. The component is then 
unfastened and may be used on subsequent installations.

SCREW FIT JOINER

Joiners are only permitted if the chimney liner length exceeds 
the maximum length of flex available and details of the 
installation have been approved in advance, in writing, in 
compliance with product warranties. The joiner is screwed 
onto the TecnoFlex Plus liner as per a standard adaptor.

Nosecone

Screw Fit Joiner

Push Fit Adaptor

* CE approved to EN1856-2

Содержание TecnoFlex Plus





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды