english 3
Dear customer,
we wish you a pleasant and successful working experience
with your new scheppach machine.
According to the applicable product liability law the manu-
facturer of this device is not liable for damages which arise
on or in connection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled workers,
• installation and replacement of non-original spare parts,
• improper use,
• failures of the electrical system due to the non-com-
pliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
Recommendations:
Read the entire text of the operating instructions prior to
the assembly and operation of the device.
These operating instructions are intended to make it easier
for you to get familiar with your device and utilize its in-
tended possibilities of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.
Controls and features, Fig. 2
1 = Oil Tank
10 = Pushbutton Box
2 = Log Pusher
11 = Transport Wheel
3 = Work Table
12 = Lift Handle
4 = Wedge
13 = Hydraulic Lever
5 = Lift Handle
6 = Support Leg
15 = Bleed Screw
7 = Work Table Extension
16 = Oil Drain Bolt w/
8 = Switch
Dipstick
9 = Motor
17 = Back-Run Stop
General Notes
• When you unpack the device, check all parts for possible
transport damages. In case of complaints the supplier is
to be informed immediately. Complaints received at a
later date will not be acknow ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• Only use original scheppach parts for accessories as well
as for wearing and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and year of
construction of the device in your orders.
In these operating instructions we have marked the places
that have to do with your safety with this sign:
m
m
General Safety Rules
• Observe all safety instructions and warnings attached to
the machine.
• See to it that safety instructions and warnings attached
to the machine are always complete and perfectly leg-
ible.
• The safety mechanism on the machine may not be re-
moved or disengaged.
• Check all power supplies. Do not use defective lines.
• Before initial operation check to be sure the two-handed
operation is properly functioning.
• Operating personnel must be at least 18 years of age.
Trainees must be at least 16 years of age, but may only
operate the machine under adult supervision.
• Always wear ear protection and work gloves when work-
ing.
• Caution when working: There is a danger to fingers and
hands from the splitting tool.
• For heavy or cumbersome pieces, use the appropriate
working aids for bracing.
• Cleaning, changing and setting of the machine may only
be carried out when the motor is switched off. Pull the
power supply plug.
• Connection, maintennace and repair work on the electri-
cal installation my be carried out only by qualified per-
sonnel.
Ox t 500
Scope of Delivery
Hydraulic Log Splitter
Operation Manual
Technical Data
Dimensions LxWxH
48 ¾“ x 24 3/8“ x 38 3/8“
Wood ø min - max
2“ – 10“
Wood Length min
- max
7 7/8” – 20 1/2”
Distance - Log
pusher– Splitting
knife
7 7/8” / 5 7/8” / 3 15/16”
Return stroke stop
3 positions
No Volt release
yes
Weight
110 lbs
Motor
Motor V/Hz
110/60
Current Amps
15
Splitting Power t*
4
Cylinder rise
12 9/16”
Cylinder speed (fast
fwd.)
1 3/16“/sec
Cylinder speed
(return)
3 1/8”/sec
Hydraulic fluid
capacity
5/8 gal
Motor speed rpm
2800
Adjusting log pusher
(2 holes)
2x 2”
Hydraulic pressure
MPa
18
Subject to technical changes!
* The maximum achievable splitting power depends on the resist-
ance of the material to be split and can, due to influencing vari-
able, deflect to the hydraulic system.
