Scheppach HG34, Инструкция по эксплуатации

Страница: 24 / 136

24 GB

www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
10.6. Accessories (Fig. 17)
K Grinding wheel insertion
L Screw insertion
M Grinding cylinder for grinding roller small
N Grinding cylinder for grinding roller large
10.7. Accessories (Fig. 18)
O Felt polishing cone
P Felt polishing wheel (small)
Q Felt polishing wheel (large)
R Grinding stone
S Polishing paste
10.8. Accessories (Fig. 19)
N Clamping sleeve 2.0-3.2 mm
11. Replacing the power cable
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its after-
sales service or similarly trained personnel to avoid
danger.
12. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip -
ment and its accessories are made of various types of
material, such as metal and plastic. Never place de-
fective equipment in your household refuse The equip -
ment should be taken to a suitable collection center for
proper disposal. If you do not know the whereabouts
of such a collection point, you should ask in your local
council offices.
13. Storage
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing temper -
ature. The ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original packaging.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool in-
creases the risk of an electric shock.
9.2 Maintenance
There are no parts inside the equipment which require
additional maintenance.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma-
bles.
Wear parts*: grinding medium, Carbon brushes, sharp-
ening wheel, angle gauge, v-belt
* Not necessarily included in the scope of delivery!
10. Accessories
10.1. Accessories (Fig. 12)
b Cutting-off wheel
c Grinding roller (large)
d Grinding belt (small)
e Grinding wheel
10.2. Accessories (Fig. 13)
f Molding cutter (trapeze)
g Molding cutter(ball-shaped)
h Molding cutter(cone)
i Metal grinding pin (cylindrical)
j Metal grinding pin (cone)
k Metal grinding pin (ball-shaped)
10.3. Accessories (Fig. 14)
l Grinding pin (finely granulated)
m Grinding pin (cylindrical fine)
n Grinding pin (cone fine)
o Grinding pin (cylindrical finely granulated)
p Grinding pin(very finely granulated)
10.4. Accessories (Fig. 15)
q Grinding pin (truss head, rough)
r Grinding pin(truss head small, rough)
s Grinding pin (cone rough)
t Grinding pin (Round rough)
u Grinding pin (Round small, rough)
v Grinding pin (truss head middle, rough)
10.5. Accessories (Fig. 16)
E Trapezebrush small
F Trapezebrush large
G Roundbrush
H Trapezebrush large brass
I Roundbrush brass
J Trapezebrush small brass
GB