Scheppach DECO-XL, Перевод с оригинального руководства пользователя

Страница: 19 / 132

19 GB
in the open position.
–
Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is speci-
fied in the operating manual.
–
Damaged switches must be replaced at a cus-
tomer service workshop.
–
Do not use any faulty or damaged connection
cables.
–
Do not use any electric tool on which the switch
cannot be switched on and off.
21 Attention!
–
Exercise elevated caution for double mitre cuts.
22 Attention!
–
The use of other insertion tools and other ac-
cessories can entail a risk of injury.
23 Have your electric tool repaired by a qualified
electrician
–
This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
Additional Safety Rules for Scroll Saws
• This scroll saw is intended for use in dry condi-
tions, and for indoor use only.
• Do not cut pieces of material too small to hold by
hand outside the blade guard.
• Avoid awkward hand positions where a sudden slip
could cause a hand to move into the blade.
• Always use the blade guard to avoid possible injury
due to blade breakage.
• Never leave the scroll saw work area with the pow-
er 01), or before the machine has come to a com-
plete stop.
• Do not perform layout, assembly or set up work
on the table while the cutting tool is in operation.
• Never turn your scroll saw on before clearing the
table of all objects: (tools, scraps of wood, etc) ex-
cept for the workpiece and related feed or support
devices for the operation planned.
Remaining hazards
The machine has been built using modern technolo-
gy in accor dance with recognized safety rules. Some
remaining hazards, how ever, may still exist.
• Long hair and loose clothing can be hazardous
when the work piece is rotating. Wear personal
protective gear such as a hair net and tight fitting
work clothes.
• Saw dust and wood chips can be hazardous. Wear
per so nal protective gear such as safety goggles
and a dust mask.
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the instructions in „Safety Precautions“, „Proper
Use“ and in the entire operating manual.
• Do not force the machine unnecessarily: excessive
cutt ing pressure may lead to rapid deterioration of
the blade and a decrease in performance in terms
of finish and cutting precision.
• Avoid accidental starts: do not press the start but-
ton while inserting the plug into the socket.
Keep this safety information in a safe place.
6. Technical data
Extent of delivery
Scroll saw
Foot switch
Accessories kit
Operating instructions
Technical data
Dimensions
L x W x H mm
630 x 320 x 330
Bench size mm ø 254 x 414
Saw blade
length mm
127
Cutting height
max. mm
50
Working depth mm 406
Lifting
movement mm
17,5
Lifting speed 1/min (electronical) 550 – 1600
Bench diagonal adjustment left
degrees
0 – 45
Weight kg 11,2
Suction connection
piece ø mm
35
Motor
Electrical motor
230-240 V~/50 Hz
Power consumption
(S1) W
(S2 30min) W
(S2 5min) W
70
90
125
Sound pressure level on
oper at or’s ear measured in
accordance with DIN 45635 with
max. speed during idle running
77,3 dB (A)
7. Installation
Setting the saw bench, Fig. 2
Setting the angle scale
• Release the star button (A and bring the saw bench
(B) to a right angle (C) in relation to the saw blade.
• Use a 90° angle tc measure the right angle be-
tween the blade and the bench. The saw blade be
90° to the angle.
• Close the star button again when the distance be-
tween the blade and the 90° angle is at a minimum.
The bench should then be at 90° to the saw blade.
• Release the lock screw (D) and bring the indicator
to the zero position. Fasten the screw. Please note:
the angle scale is a useful piece of supplementary
equip ment, but should not be used for precision
work. Use scrap wood for saw tests, adjust the
bench if neces sary.
Note: The bench should not be on the motor block,
this can cause undesireable noise.
Horizontal saw bench and diagonal cuts, Fig. 2+3
• The saw bench can be positioned into a 450 di-
agonal position or be left in the horizontal position.
• You can read off the approximate slope angle
by using the angle scale located under the work
bench. For more exact adjustment, use scrap wood
for some saw tests; adjust the bench if necessary.