Scheppach 5909219900, Перевод оригинального руководства пользователя

Страница: 22 / 96


www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58
22 | GB
• In the power tools, use only the batteries de-
signed for the purpose. The use of other batter-
ies may result in injuries and risk of fire.
• Keep the unused battery away from paper
clips, coins, keys, nails, screws and other small
metal objects, which could cause bridging of
the contacts. A short circuit between the battery
contacts may cause burns or fire.
• If used incorrectly, liquid may leak from the bat-
tery. Avoid contact with this. In the event of ac-
cidental contact, rinse off with water. If the liquid
gets into eyes, seek medical assistance. Leaking
battery fluid may cause skin irritations or burns
.
6. SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
8. Additional Safety Warnings
1. SPECIAL SAFETY INSTRUCTIONS FOR RE-
CIPROCATING SAWS
• Hold the electric tool by the insulated gripping
surfaces when performing work in which the
cutting tool may come into contact with hidden
wiring. Contact with a live wire can also cause a
charge in metal parts of the device and result in an
electric shock.
• Keep hands away from the sawing area. Do not
reach underneath the work piece. Upon contact
with the blade there is a risk of injury.
• Only when the electric tool is turned on should
the sawing blade be moved against the work
piece. There is a risk of kickback if the tool insert
jams in the work piece.
• Make sure that the base plate is securely placed
against the work piece during sawing. The saw
blade can tilt and lead to loss of control over the
power tool.
• After you have finished work, turn the power
tool off and do not pull the saw blade out of the
cut until it has come to a standstill. In this way
you will avoid any kickback and can safely put own
the power tool.
• Use only undamaged saw blades in perfect
condition. Bent or blunt blades can break, ad -
versely affect the cut or cause kickback.
• Do not brake the saw blade after switching the
device off by applying side pressure. The saw
blade may be damaged, break or cause a kick -
back..
• Tighten the material firmly. Do not support the
work piece by hand or foot. Do not touch any
objects or the ground with the saw running.
There is a risk of kickback.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of
the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjust -ments, changing ac-
cessories, or storing power tools. Such preven -
tive safety measures reduce the risk of starting the
power tool accidentaIly.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less Iikely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5. CAREFUL HANDLING AND USE OF BATTERY
DEVICES
• Charge the batteries only in chargers that are
recommended by the manufacturer. Risk of fire
if a charger that is suitable for a specific type of
battery is used with other batteries.