www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
17 / 172
In addition to the safety notes contained in the pre
-
sent operating instructions and the special regu-
lations of your country, the generally recognized
technical rules for the operation of wood working ma-
chines must be observed.
We cannot accept any liability for damage or acci
-
dents which arise due to a failure to follow these in-
structions and the safety instructions.
2. Device description (Fig. 1+2)
1.
Clamping lever: for removing the saw blade.
2.
Blade guard: protects your hands from injury.
3.
Work piece holder
4.
Shavings blower: keeps the workpiece area free
from dust.
5.
electronical speed switch deco 402: Speed switch
6.
On/Off switch
7.
Angle scale: you can read the angle position of
the table with this scale.
8.
Lighting
9.
On/off switch lighting
10.
Table insert
11.
Toolbox
12.
Setting gauge for saw blades without pin
3. Scope of delivery
•
When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately.
•
Complaints received at a later date will not be
acknow ledged.
•
Check the delivery for completeness.
•
Read the operating instructions to make yourself
familiar with the device prior to using it.
•
Only use original scheppach parts for accessories
as well as for wearing and spare parts. Spare parts
are available from your specialized dealer.
•
Specify our part numbers as well as the type and
year of construction of the device in your orders.
A
ttention
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal
-
lowing and suffocation!
4. Intended use
CE tested machines meet all valid EC machine guide-
lines as well as all relevent guidelines for each machine.
•
The machine must only be used in techni
-
cally perfect con dition in accordance with its
designated use and the in
structions set out
in the operating manual, and only by safe
-
ty-conscious persons who are fully aware of
the risks involved in operating the machine.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working ex
-
perience with your new scheppach Scroll Saw.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
•
improper handling
•
non-compliance with the instructions for use
•
repairs by third party, non authorized skilled work
-
ers
•
installation and replacement of non-original spare
parts
•
improper use
•
failures of the electrical system due to the non-
compliance with the electrical specifications and
the VDE 0100, DIN 57113 / VDE 0113 regulations
Warning
To avoid electrical hazards, fire hazards, or damage
to the tool, use proper circuit protection.
Your drill press is wired at the factory for 230 V oper
-
ation. Connect to a 230 V/15 amp branch circuit and
use a 15 amp time delay fuse or circuit breaker. To
avoid shock or fire, replace power cord immediately if
it is worn, cut or damaged in any way.
Recommendations:
Read the entire text of the operating instructions pri-
or to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti
-
lize its intended possibilities of use.
The operating instructions contain important notes
on how to work safely, properly and economically
with your machine and how to avoid dangers, save
repair costs, reduce downtime, and increase the reli-
ability and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable reg
-
ulations of your country with respect to the operation
of the machine.
Put the operating instructions in a clear plastic fold-
er to protect them from dirt and humidity, and store
them near the machine. The instructions must be
read and carefully observed by each operator prior
to starting the work. Only persons who have been
trained in the use of the machine and have been in-
formed on the related dangers and risks are allowed
to use the machine.
The required minimum age must be met.
GB
Содержание 5901403850
Страница 165: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 165 172 ...
Страница 166: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 166 172 ...
Страница 167: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 167 172 ...
Страница 168: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 168 172 ...
