www.scheppach.com
26 | GB
Even when the equipment is used as prescribed it is
still impossible to eliminate certain residual risk factors.
The following hazards may arise in connection with the
machine’s construction and design:
• Contact with the saw blade in the uncovered saw zone.
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces.
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the saw blade.
•
Damage to hearing if ear-muffs are not used as nec
-
essary.
• Harmful emissions of wood dust when used in
closed rooms.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
5. Safety information
General power tool safety warnings
m
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future ref-
erence.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1. Work area safety
a)
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b)
Do not operate power tools in explosive at-
mospheres, such as in the presence of flam
-
mable liquids, gases or dust.
Power tools create
sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while op-
erating a power tool.
Distractions can cause you
to lose control.
2. Electrical safety
a)
Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
35. ON/OFF switch for laser
36. Screw
37.
Inner flange
a. 90° stop angle (not supplied)
b. 45° stop angle (not supplied)
c. Hexagonal key
3. Scope of delivery
• Drag, crosscut and mitre Saw
• 1 x Clamping device (8)
• 2 x Workpiece support (9)
• Sawdust bag (21)
• Hexagonal key (c)
• Operating manual
4. Intended use
The crosscut, drag and mitre saw is designed to cross-
cut wood and plastic respective of the machine’s size.
The saw is not designed for cutting firewood.
Warning!
Do not use the saw to cut materials other
than those specified described in manual.
Warning!
The supplied saw blade is only intended for
the sawing of wood! Do not use this blade for the saw-
ing of firewood!
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be
liable for any damage or injuries of any kind caused as
a result of this.
The equipment is to be operated only with suitable saw
blades. It is prohibited to use any type of cutting-off
wheel.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have to
be acquainted with this manual and must be informed
about the equipment’s potential hazards. It is also im-
perative to observe the accident prevention regulations
in force in your area. The same applies for the general
rules of health and safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
Содержание 5901218901
Страница 113: ...www scheppach com 113...
Страница 114: ...www scheppach com 114 HM1247...
