Domotique embarquée
Embedded home automation
P.6
Domotique embarquée
Embedded home automation
Installation instructions
• This device must be placed in a place protecting it from any risk of water splashing. Install in a ventilated location
• Do not install on supports that are sensitive to heat, such as carpet or PVC flooring, etc.
• The product must be installed away from heat and humidity
Meaning of the LEDs:
- LED off: the circuit is inactive.
- LED on: the circuit is active.
!
WARNING: Connection/disconnection with power on
Do not perform connection or disconnection with power on.
INPUT / POWER SUPPLY
Type of connection
Cross section
Clip 8mm + connector 2-way
de 6 à 16 mm²
OUTPUT
Type of connection
Cross section
2 x spring connectors 6-way
6 mm²
CAN BUS
2 x CAN connectors type 6-way Micro-Fit
LIN BUS
1 x LIN connector type 4-way Micro-fit
CODAGE
With DIP SWITCH
PROTECTION TO BE PROVIDED ON THE SUPPLY LINE
Protection rating
Protection location
Fuse or circuit breaker 50A maximum
Accessible and identified for the user
Connection
Mounting:
95
84,50
150
138
125,50
3,20
Installation cutouts:
84,50 x 125,50 mm
Mounting distance :
45 x 138 mm
Mounting distance of the
2 screws support
:
138 mm
Visible thickness after mounting :
14,3 mm
Back clearance zone for connection :
80 mm (behind the product)
47,5
6