Scheer 077480, Инструкция по установке и обслуживанию

Страница: 15 / 32

15
Note:
To maintain warranty the fuel burner must be equipped with an oil filter for a one-
pipe system with return line, an automatic bleeder, and a micro filter.
The supplied silicone hose for the ventilator leads the air to the burner for combusti-
on. This avoids diesel odors.
The fuel is taken from the vehicle fuel tank or from a separate fuel tank.
Use fuel lines with a
internal diameter of 6 mm (max. 10 mm) for the connection
between the fuel tank and the oil filter
.
Different diameters with the approval of the manufacturer only.
unsupported fuel lines must be secured to prevent them from sagging.
An oil filter is included in all basic packages.
NOTICE:
Failure to observe the installation condition can lead to malfunction or damage of equipment.
• Automatic bleeders always have to be installed above the level of the oil pump.
• At least 50% of the length of the fuel line should be ascendingly mounted.
Do not interchange the feed and return connection!
NOTICE:
Repeated emtying of fueltank can cause damage to the burner!
The Tank Control option (Item no. 0170018/0170019) is recommended as a preventive measure.
Antifreeze liquid for heating water (BIO-GLYKOL)
Automatic venting for heating water
Ready-mix with minimum antifreeze -24°C
• Temperature stability 214°C
• Completely biodegradable
•
Significantly longer shelf life than propylene glycol
Item No.
30 liter canister 190090
1 liter bottle 190091
Antifreeze components:
•
1.3 propanediol (100% plant derived)
• HTX1 approval for food related areas
•
CO
2
reduced
Item No.
Ölfilter 0405200
Filterpatrone 040104
with hose connection 22 mm
Item.-No.: 190088
with 1/2“ male thread
Item No.: 190089
Oil supply / oil filter for MH - series and MH micro