CSV 409 A caravan charging system instruction manual
8
Issued: 20.02.2020
8050101 BA / EN
5.2 Starting the system
Y
ATTENTION!
Caravan charging system can be set up incorrectly!
The connected devices will be damaged. Therefore prior to starting:
F
You must ensure that the battery selector switch (Fig. 2, Pos. 21) is
set to the correct position for the type of battery being used.
Press the rocker switch so that it is briefly in the “ON” position.
The 12 V main switch switches all consumers on and off (exception: a
fridge’s control electronics).
Y
ATTENTION!
Violation of 230 V mains voltage limit!
Will damage the caravan charging system, 12 V consumers or other con-
nected devices:
F
The generator must not be switched in until it is running smoothly.
F
It is essential that the generator complies with the mains supply speci-
fications.
F
Do not connect the caravan charging system to the onboard mains
voltage on car ferries (a non-problematic mains voltage cannot always
be guaranteed on car ferries).
Utilisation of an upstream overvoltage protection device (OVP) is
recommended.
Y
ATTENTION!
Battery buffer function missing!
The connected devices will be damaged:
F
Never run the solar charger without a battery being connected.
Y
ATTENTION!
Battery discharge!
Towing vehicle cannot be started:
F
Switch off the ignition when the towing vehicle is at a standstill.
12 V main switch
Generator operation and
car ferries
Solar charger operation
Towing vehicle
operation
