DISASSEMBLY INSTRUCTIONS
B2-1
2. REMOVAL OF VCR DECK PARTS
2-1: TOP BRACKET (Refer to Fig. 2-1)
Extend the 2 supports (1).
Slide the 2 supports (2) and remove the Top Bracket.
1.
2.
2-2: CASSETTE HOLDER ASS'Y (Refer to Fig. 2-2)
Move the Cassette Holder Ass'y to the front side.
Push the Locker R to remove the Cassette Side R.
Remove the Cassette Side L.
1.
2.
3.
Fig. 2-1
Main Chassis
Main Chassis
Top Bracket
Top Bracket
Main Chassis
Main Chassis
Cassette Side L
Cassette Side R
Locker R
Fig. 2-2
2-3: CASSETTE SIDE L/R (Refer to Fig. 2-3-A)
Remove the Locker Spring.
Unlock the 4 supports (1) and then remove the
Cassette Side L/R.
Unlock the support (2) and then remove the Locker R.
1.
2.
3.
Link Ass'y
NOTE
1.
2.
In case of the Locker R installation, check if the one
position of Fig.2-3-B is correctly locked.
When you install the Cassette Side R, be sure to move
the Locker R after installing.
2-4: LINK UNIT (Refer to Fig. 2-4)
Set the Link Unit to the Eject position.
Unlock the support (1).
Remove the (A) side of the Link Unit first, then remove
the (B) side.
1.
2.
3.
Fig. 2-4
Fig. 2-3-A
Cassette Side L
Cassette Side R
Locker R
Cassette Holder
Locker Spring
Fig. 2-3-B
Check if this
position is locked.
(A)
Link Unit
Main Chassis
Link Unit
(B)
Main Chassis
Cassette Side R
Locker R
(1)
NOTE
1. After the installation of the Top Bracket, bend the
support (1) so that the Top Bracket is fixed.
(1)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
2-5: LINK LEVER/FLAP LEVER/BOT COVER
(Refer to Fig. 2-5)
Fig. 2-5
Unlock the support (1).
Remove the BOT Cover.
Extend the support (2).
Remove the Link Lever.
Remove the Flap Lever.
1.
2.
3.
4.
5.
Link Lever
Flap Lever
(2)
(1)
BOT Cover
