9
Connecting a USB device
1.Power-on the unit.
3.Insert a USB key inside the connector.
4.Press the SOURCE key from the remote control to start.
Remark
: Depending on the capacity of the device, the reading can
take more than 1 minute before launching the video.
2
.
Make sure no disc has been inserted inside the tray
The unit cannot read my USB device
Remark
: Depending on the capacity of the device, the reading can
take more than 1 minute before launching the video.
Connecting a memory card
The unit cannot read my memory card
Check firstly that your memory card is compatible with the
memory cards are SD, SDHC, MS, MMC formats. We have tested this
unit with most of the market's memory cards; we cannot however
guarantee a full compatibility with all the cards in the market because of
the multiple technology standards in use. Should you have a compatibility
problem: please use a memory card with a lower capacity (4GB or lower)
or else connect the unit through a USB device.
unit.Supported
1.Power-on the unit.
2.Make sure no disc has been inserted inside the tray.
3.Insert a compatible memory card inside the connector.
4.Press the SOURCE key from the remote control to start.
This unit does not support a direct USB connection with a computer,
nor a connection with a USB-external hard disk. You need to use
either a USB device or a MP3 player.
Once you have plugged your device to the unit, you may need to
switch on the USB device before it can operate.
Check that the files system of your USB device is formatted into the
FAT or FAT 32 format. USB device formatted into NTFS are not
compatible with this unit. Caution: if you attempt to modify your file
system, formatting your device will erase all data. Please refer to
your USB device's instruction manual first.
Warning: Connect your USB device directly to the USB port of the
device. Using an extension cable is not recommended and may
cause interference and failure of data transfer.
