6
USB OPERATION
GENERAL OPERATION
PLAY / PAUSE / USB
Press to start playing tracks from the USB .
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP
et SKIP
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
STOP
Press to stop all USB operation.
PLAYBACK
1. Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
3. Press and hold the “PLAY / PAUSE” button for a few seconds to entry USB mode.
4. Playback will start automatically from the first track.
5. Pr
ess the “STOP” button when finished.
6. Press the “PLAY / PAUSE” button again, playback will start from the first track.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to
CD / MP3 OPERATION.
The unit cannot read my USB device.
-
Once you have plugged your device to the unit, you may need to switch on the USB
device before it can operate.
-
This unit does not support a direct USB connection with a computer. You need to use
a USB device, a MP3 player or a PMP (Portable Multimedia Player with hard disk).
-
If you are using a USB external hard disk: you need to connect your device
simultaneously to an external power source and to the unit. If you are using a self-
powered PMP, make sure that the battery is sufficiently loaded.
-
Check that the files system of your USB device is formatted into the FAT or FAT 32
format. USB device formatted into NTFS are not compatible with this unit. Caution: if
you attempt to modify your file system, formatting your device will erase all data.
Please refer to your USB device’s instruction manual first.
-
Warning: Connect your USB device directly to the USB port of the device. Using an
extension cable is not recommended and may cause interference and failure of data
transfer.
