For the two channel MicroPre 2, figure 5 shows the wiring using a balance pot and an over all volume and tone. This
configuration may be used when preamping two magnetic pickups. It normally will not work with a piezo pickup . (A
balance pot is not supplied with the Micro Pre 2 wiring kit, three normal pots are supplied).
Figure 6 shows one volume control used for each channel and an over all tone control. This configuration may be used
when preamping two magnetic pickups. If this circuit is used in conjunction with a piezo pickup, as the tone control is
rotated and signal is shunted to ground through the cap, it has the effect of turning off the piezo.
Figure 7 shows two separate volume controls and a master volume control. This configuration will work properly when
wiring a mag pickup and a piezo pickup together.
Re v M a y 1 5 , 2 0 1 8
figure 6
figure 5
fig 7
