Page 13
Optional accessories:
• humimeter USB data interface module - USB stick with LogMemorizer software
(data recording and analysing software) and USB cable
• Battery powered thermo printer (can only be used with humimeter USB data
interface module) - described in a separate user manual
• Bluetooth module (can only be used with humimeter USB data interface module)
- described in a separate user manual
• Test block - for checking the calibration on two different points
3.3
Inserting the batteries
1. Remove the rubber protection
from the device. Pull it off from
the upper side of the housing. If
you have an optional USB inter-
face, pull out the protective cover
of the USB socket first. (figure
1
and
2
)
2. Take the device in one hand and press with your thumb
on the marked area of the battery compartment. Now
slide the battery cover downwards from the device (2)
(figure
3
).
3. Insert the batteries with negative and positive terminals
matching those indicated on the battery compartment.
Press the batteries down firmly, so that they lay flat on
the bottom of the housing (figure
4
).
»
When all the batteries are inserted, the device turns on
automatically.
4. Slide the battery cover back onto the housing until it
clicks into place. Then put the rubber protection onto the
housing - start with the side where the battery cover is.
(figure
5
).
1
2
3
4
5
Содержание humimeter PMZ
Страница 45: ...Page 45 14 Notes ...
Страница 46: ...User manual humimeter PMZ Page 46 ...
Страница 47: ...Page 47 ...
