Schaller FL2, Руководство по эксплуатации, Страница: 20 / 48

humimeter FL2 Operating Manual
Page 20
5.3 Simplified user
The device can be configured in such a way that the access of the user can be reduced
to the product selection menu combined with the hold function.
5.3.1 Activating/deactivating the simplified user
• For information on how to activate/deactivate the simplified user, see section
"9.7 Changing the Userlevel" .
5.3.2 Using the simplified user
The simplified user offers the following limitations:
• The only useable menu is a slightly modified pro-
duct selection menu (figure 22 ).
»
No access to the Data Log or main menu.
• Hold function replaces the function to switch bet-
ween the different menus (see "5.4 Hold function
- Freezing the displayed values" ).
5.4 Hold function - Freezing the displayed values
The device can be configured in such a way that the information being shown on the
display will freeze at the touch of a button until a new button is pressed. This function
can be very useful when e.g. taking readings in spaces where it is not possible to see
the display (e.g. overhead).
5.4.1 Activating the hold function in the options menu
To do so: The device has to be switched on and be in the product selection menu.
1. Press twice or hold for 2 seconds.
2. Select Options . To do so, press or and con-
firm by pressing .
3. Select Log Time (figure 23 ). To do so, press or
and confirm by pressing .
4. Select Hold (figure 24 ). To do so, press or
and confirm by pressing .
»
The setting has been saved.
22
23
24