To manually compel a longer stable awning state, the au-
tomatic sunlight function can be completely disabled for 5
hours by pressing the Open or Close button for 5 seconds.
Pressing a button during this period re-enables the automa-
tic sunlight function.
The automatic wind function is always enabled and always
overrides all other functions. This avoids the risk of damage
to the awning system from strong wind, even in the event of
accidental user error.
The response time for wind is preset and amounts to 1 to 15
seconds, depending on how much the wind speed exceeds
the threshold value. The response time for sun exposure can
be individually adjusted using a simple programming process
(factory default setting: 10 minutes).
The motor run time can also be programmed to match the
individual awning (factory default setting: 90 seconds).
When the SMS 1 or SMS U1 is used as a group controller,
this can also be set in a programming process. In this case
the controller freezes the outputs until the wind level drops
below the set limit value.
Light intensity threshold setting
Setting range 20,000 –100,000 lx
Sensor type setting (SMS 1 only)
SWL 2 = combined wind and light sensor
SL 1 = light sensor
SW 2 = wind sensor (anemometer)
In the “2s” position the SMS 1 generates a 2-second control
pulse on the relay output, which for example can be used to
actuate lower-level controllers.
In the “Hold” position the programmed motor run times (see
functional diagrams) apply.
Status indicator LEDs:
SMS U1:
A blinking red LED ( ) indicates wind speed above
the threshold level; blinking green ( ) indicates brightness
above the threshold level.
SMS 1:
Blinking red ( ) with LED W indicates wind speed
above the threshold level, with LED B light level above the
brightness threshold, and with LED D light level below the
twilight threshold.
LEDs 14 and 24 indicate the corresponding motion direction.
Status indicator LEDs
LED off
LED lit red
LED blinks red
LED lit green
LED blinks green
LED blinks alternating red/green
Twilight threshold setting (SMS 1 only)
Setting range 1 – 70 lx
Wind speed threshold setting
Setting range 10 – 70 km/h
Motor controllers
www.schalk.de
M
otor
c
on
tro
lle
rs
