Y-NOT SPLIT-IT MOUNTING INSTRUCTIONS
SCHAFFERT MFG. CO., INC.
308-364-2607
OR
800-382-2607
71495 rd. 397 ∙ indianola, ne 69034 ∙ 308-364-2607 or 800-382-2607 ∙ fax: 308-364-2410 ∙ [email protected] ∙ www.schaffert.com ∙ 20 apr 2020
For Case IH Planters
CASE IH 1200 PLANTERS
CASE IH 800 900 950 955 PLANTERS
& 5400 SOYBEAN SPECIAL DRILL
Follow instructions on other side to assemble the Y and attach it to the Rebounder.
Use the tie strap to hold the hose to the seed tube—leave it loose. This prevents it
from touching the disc. Make sure the hose can flex with the Rebounder.
Place the 1/4" tube clamp to the bolt that holds the Rebounder.
Thread the hose up inside the Case IH seed boot.
Remove covering disc bolt from seed boot and slide housing out of seed boot
enough to use a grinder to bevel the covering disc bracket for the 1/4" fertilizer
hose.
OR
Remove covering disc bracket and grind a shallow groove in the center of the
bracket so the fertilizer hose can lay in the groove and not be crushed.
You might have to shorten the clear hose so it doesn’t come in contact with the
covering disc bracket.
Put a small tie strap around the clear hose to hold it in place.
Clear hose should be cut off to within 1" of the covering disc,
pivot so that the Rebounder can flex without jamming the
clear hose into the pivot casting of the covering disc.
#1:
#3:
#4:
#2:
#2
#3
#2:
#3:
#4:
#5:
Y-Not kit
covering disc bracket
