Disassembly and Cleaning
draft2go
BA-49-001-09
17 von 21
6
Disassembly and Cleaning
6.1
Disassembly
WARNING
Be careful when releasing the dispensing head.
Opening the dispensing head releases a force of approx. 13 kg, so
never stand with your head directly over the dispensing head.
Lift the lever upwards.
To remove the beer line, the
tap must be pulled forwards.
When the two release buttons are
pressed inwards, the lever lifts up-
wards and the gas supply is inter-
rupted.
Pull the tappet out
upwards.
Using two hands is also recommended here.
Push the dispensing head backwards and lift it off the KEG.
