Assembly and commissioning
draft2go
BA-49-001-09
11 von 21
5.3.3 Fitting the beer line to the dispensing head
ATTENTION
Never press the lever down before the tappet
has been inserted, as this can lead to gas be-
ing released!
Before the beer line can be inserted from the
front, the stainless steel faucet spout must
be removed.
When it is inserted, the tappet must be
rotated to find the correct position.
Once this position is found, the tappet in-
dependently sinks down by approx.
3mm.
You can clearly see whether it is
in the correct position by looking
into the dispensing head from
above.
Before inserting the tappet, the black O-
ring must be moistened with or dipped in
water, or lubricated with food-safe oil or
grease.
