Programming
BASCAP_TOUCHIT_EN
V04 | 10.2018
76
Choco settings
Parameters: Choco settings
Display text
Description
Setting range
Notes
601) Choco quantity
This setting defines the fill volume for the be-
verage.
40-999 ml
The standard setting is
[100 ml].
A selection with choco is
selected in the "Powder
system" system parame-
ter.
602) Hot rinsing quantity
Hot rinsing quantity after dispensing choco:
The flush water is included in the water volu-
me. The flush water is for "flushing" the mixer
or diluting the powder and water mixture.
Example (for choco powder):
•
Water volume 200 ml
•
Of which is flush water 20 ml
The powder and water mixture is not to be di-
luted. The lowest value is therefore used to
flush the mixer.
With instant powder, e.g. a soup, you can in-
crease the flush water value to dilute.
20-50 ml
The standard setting is
[20 ml].
The hot rinsing water
quantity should be set so
that clear water is dispen-
sed after the powder mix-
ture is dispensed. If it is
not, powder may be left in
the mixing bowl and hose
and lead to a blockage.
603) Choco dispenser
Menu for selecting the choco dispenser.
Left
Right
[2x choco] is selected in
the "Powder system" sy-
stem parameter.
604) Choco powder quantity
With a "Choco powder" dispenser:
The entry in %controls the ratio between the
choco powder quantity and water volume.
The higher the percentage setting, the grea-
ter the proportion of powder. This produces a
stronger flavour.
20-100%
The standard setting is
[50%].
[Choco powder] is
selected in the "Powder
system" system parame-
ter.
605) Choco powder quantity left
With a "Choco powder left" dispenser:
The entry in %controls the ratio between the
choco powder quantity left and water volu-
me.
The higher the percentage setting, the grea-
ter the proportion of powder. This produces a
stronger flavour.
20-100%
The standard setting is
50%.
The "Choco dispenser"
parameter contains the
[Left] selection.
[2x choco powder] is
selected in the "Powder
system" system parame-
ter.
606) Choco powder quantity right With a "Choco powder right" dispenser:
The entry in %controls the ratio between the
choco powder quantity right and water volu-
me.
The higher the percentage setting, the grea-
ter the proportion of powder. This produces a
stronger flavour.
20-100%
The standard setting is
[50%].
The "Choco dispenser"
parameter contains the
[Left] selection.
[2x choco powder] is
selected in the "Powder
system" system parame-
ter.
