Programming
BASCAP_BF_EN
V04 | 08.2019
64
Choco settings
Hot water settings
Steam settings
Parameters: Choco settings
Display text
Setting range
Description
Choco quantity
40-999 ml
This setting defines the choco quantity for the beverage.
The standard setting is 100 ml.
"Choco + milk" is selected in "Powder system" under "Sy-
stem Parameters".
Flush water quantity
20-50 ml
The flush water quantity after a chocolate beverage is dis-
pensed:
The flush water quantity set here is used to clean the
chocolate output components every time a choco beverage
is dispensed.
The standard setting is 20 ml.
The flush water is a part of the water quantity set in the
"Choco quantity" parameter.
Choco dispenser
Left
Right
Selection menu for the chocolate dispenser.
"2x choco" is selected in "Powder system" under "System
Parameters".
Powder quantity (left, right, 2 x
choco)
20-100%
The entry in %controls the ratio between the powder quan-
tity and water quantity.
The higher the percentage setting, the greater the proporti-
on of powder. This produces a stronger flavour.
The standard setting is 50%.
Hot water settings parameter
Display text
Setting range
Description
Water volume
1-99 sec
Sets the dispensing time for the hot water quantity.
The "Hot water" system parameter is activated.
The dispensing options are described in the "Dispensing
mode" parameter in the "Common settings".
Parameters: Steam settings
Display text
Setting range
Description
Dosing time
1-99.9 sec
Steam dispensing duration setting
The standard value is 90.0 sec.
A steam system is selected in the "Steam outlet" system
parameter.
The dispensing options are described in the "Dispensing
mode" parameter in the "Common settings".
