Schaerer Celebration BC, Руководство пользователя

Страница: 32 / 62

Operation
Page 4-8
BASCC BC - 02.04 - V01
4.5.6 Generating Steam
Note:
To output steam, press the steam valve bow. Output is through the steam pipe located
to the left of the hot water pipe (Fig. 021).
Steam is used for heating beverages such as milk or cocoa.
Danger!
Keep away from underneath the steam pipe while steam is delivered! Hold the
cup in such a way that no liquid is spilled onto your hands or other body parts
during heating!
1. Point the steam pipe towards the drip grid.
Remove the condensation water from the pipe
system by briefly folding down the steam valve
bow to open it. If steam escapes from the
steam pipe, turn the bow upward again.
2. Immerse the steam pipe into the container of
the beverage to be heated until it reaches the
bottom.
3. Press the steam valve bow.
Steam is released. No message is displayed on
the control panel during the steam output.
Danger!
When the boiling point is reached, the beverage may start to spill over. During
steam output, ensure that the steam pipe remains immersed in the liquid.
4. Heat the content to the desired temperature.
Ensure that the steam pipe is always immersed
in the liquid.
Tip: The deeper the sound, the higher the
temperature of the heated liquid.
5. To end or cancel steam output:
Close the steam valve by moving the bow
upward.
6. Put the cup aside.
7. Clean the outside of the steam pipe with a wet
and clean paper tissue.
8. Point the steam pipe towards the drip grid. To
clean the steam pipe on the inside, open it
briefly, twice in succession.
Fig. 021
1