Sceptre X325BV-FMQR, Руководство пользователя

Страница: 49 / 56

-
49
-
www.SCEPTRE.com
SCEPTRE X325BV-FMQR User Manual
Problems Solutions
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed
captioning and the box will disappear. Refer to page 34 for
more information.
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The TV has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN When your TV’s resolution is higher than the digital channel’s
broadcast resolution, the signal is up-converted to match your
TV’s resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH
DEFINITION USERS The TV is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
TIPS FOR
LETTERBOX
CONTENT USERS Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The TV has the
capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
TV TURNS OFF
AUTOMATICALLY
AFTER 10 MINUTES The TV features a power saving mode which will automatically
turn off the TV, if there’s no signal provided for more than 10
minutes.
My cell phone doesn’t
work when I connect
the MHL cable to
HDMI. Check if you connected to HDMI3 or another HDMI since
ONLY HDMI2 works with MHL. If it still doesn’t work make
sure you have the correct MHL cable (some have more pins
than others). Ultimately, please consult your cell phone
manufacturer for compatibility issues.
Under MHL the TV’s
remote won’t control
the cell phone screen
fully. For total control you will need to use the cell phone’s touch
screen. The TV’s remote have limited functions and its
controls are dependent on the program you are using.
UNDER MHL THE
TV’S REMOTE WON’T
CONTROL THE CELL
PHONE SCREEN
FULLY For total control you will need to use the cell phone’s touch
screen. The TV’s remote have limited functions and its
controls are dependent on the program you are using.
THE TV DOES NOT
SCAN IN DIGITAL
CABLE CHANNELS This TV only supports digital antenna signal and analog cable
signal. This TV does not support QAM.