UMS Series P5
If You
’
ve Connected Cable or Satellite Set-top Boxes to the HDTV
…
1.
Press the
button on the side of the HD Display or the SOURCE button on the remote
control and you will see the picture above.
2.
Use
▲▼
buttons to select the source you want to switch to and press the ENTER button in the
middle of the
▲▼
buttons.
3.
If you have connected coax cable (the cable with a needle in the middle and a ring to
tighten the connection) from the box to the display, you
’
ll need to change to the correct
channel. Make sure your source is TV and press 3 and ENTER on the display
’
s remote.
If that does not work you
’
ll need to connect your Satellite or Cable Company for support.
Please Note:
•
Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting
stations for more information.
•
The HD Display
’
s tuner is designed for HD Display therefore requires a stronger
signal than normal Displays. If you cannot achieve that signal level with your antenna
or cable
, your HD Display might lose picture or sound.
•
HDMI 1 doubles as a MHL enabled port, so if you have a cell phone that
supports the Mobile High-definition Link, you can purchase a MHL cable and
connect it to HDMI 1.
•
HDMI1 supports MHL devices such as ROKU MHL streaming stick device.
