- 4 -
Smart Sound Bar 2.1 User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the Sound Bar. Keep
these instructions in a safe place for future reference.
To avoid the risk of electric
shock or component damage,
switch off the power before
connecting other components to
the SOUND BAR.
Unplug the power cord before
cleaning the SOUND BAR.
Please use the included custom
bezel cleaning cloth for cleaning
the bezel of the SOUND BAR
only. Do not use a liquid or a
spray cleaner for cleaning the
product. Do not use abrasive
cleaners.
Always use the accessories
recommended by the
manufacturer to insure
compatibility.
When moving the SOUND BAR
from an area of low temperature
to an area of high temperature,
condensation may form on the
housing. Do not turn on the
SOUND BAR immediately after
this to avoid causing fire, electric
shock or component damage.
Do not place the SOUND BAR
on an unstable cart, stand, or
table. If the SOUND BAR falls, it
can injure a person and cause
serious damage to the appliance.
Any heat source should maintain
a distance of at least 5 feet
away from the SOUND BAR, i.e.
radiator, heater, oven, amplifier
etc. Do not install the product
too close to anything that
produces smoke or moisture.
Operating the product close to
smoke or moisture may cause
fire or electric shock.
Never push any object into the
ventilation slots of the SOUND
BAR. Do not place any objects
on the top of the Product. It
could short circuit parts causing
a fire or electric shock. Never
spill liquids on the SOUND BAR.
The SOUND BAR should be
operated only from the type of
power source indicated on the
label. If you are not sure of the
type of power supplied to your
home, consult your dealer or
local power company.
The power cable must be
replaced when using different
voltage from that specified in the
User Manual. For more
information, contact your dealer.
Do not overload power strips
and extension cords.
Overloading can result in fire or
electric shock.
The wall socket should be
installed near the equipment and
should be easily accessible.
Only the marked power source
can be used for the product. Any
power source other than the
specified one may cause fire or
electric shock.
Do not touch the power cord
during thunderstorms. To avoid
electric shock, avoid handling
the power cord during electrical
storms.
Unplug the unit during a
lightning storm or when it will not
be used for a long period of time.
This will protect the SOUND
BAR from damage due to power
surges.
Do not attempt to repair or
service the product yourself.
Opening or removing the back
cover may expose you to high
voltages, the risk of electric
shock, and other hazards. If
repair is required, please contact
your dealer and refer all
servicing to qualified service
personnel.
Keep the product away from
moisture. Do not expose this
appliance to rain or moisture. If
water penetrates into the
product, unplug the power cord
and contact your dealer.
Continuous use in this case may
result in fire or electric shock.
Do not use the product if any
abnormality occurs. If any
smoke or odor becomes
