Sceptre S1200, Инструкция по установке

Страница: 4 / 4

4
!!!!!
How do I know the SCSI card and scanner How do I know the SCSI card and scanner
How do I know the SCSI card and scanner How do I know the SCSI card and scanner
How do I know the SCSI card and scanner
are work properly? are work properly? are work properly? are work properly? are work properly?
1.Click on the "Start" -> "Setting" -> "Control
Panel" -> "System" -> "Device Manager" ->
SCSI Controllers.
!!!!!
What is the function of the "Start" button What is the function of the "Start" button
What is the function of the "Start" button What is the function of the "Start" button What is the function of the "Start" button
at front of scanner? at front of scanner? at front of scanner? at front of scanner? at front of scanner?
1. This is the One-Touch-Button that allows you
to open the IMS Shell application and
Vividscan dialog simultaneously.
2. You can press the "Start" button to execute
scanning after selecting the scan area.
!!!!!
How do I use OCR? How do I use OCR?
How do I use OCR? How do I use OCR?
How do I use OCR?
1. Change the "Image Type" "Image Type" "Image Type" "Image Type" "Image Type" to "LineArt" "LineArt" "LineArt" "LineArt" "LineArt"
2. Prescan the document
3. Select scanning area
4. Scan the document
5. Close the Twain Driver
6. Drag the file to the word processor icon in the
IMS Shell Application Bar.
" " " " "
Tech Support Tech Support Tech Support Tech Support Tech Support
626.369.3698
www.sceptre.com
scanner@sceptre.com
" " " " "
IMS Shell Support IMS Shell Support IMS Shell Support IMS Shell Support IMS Shell Support
www.gic.com.tw.
FAQ FAQ
FAQ FAQ FAQ
!!!!!
If you get black images: If you get black images:
If you get black images: If you get black images:
If you get black images:
Please unlock your scanner.
!!!!!
If you get a "Scanner Not Found" message: If you get a "Scanner Not Found" message: If you get a "Scanner Not Found" message: If you get a "Scanner Not Found" message: If you get a "Scanner Not Found" message:
1. Check the Sequence: First turn on the scan-
ner, then turn on your PC.
2. Check the SCSI Card: Make sure the SCSI
card is installed correctly in Device Manager.
3. Check the SCSI Cable: Reconnect the cable
to the scanner and to the SCSI card.
4. Check the SCSI ID: Make sure all the SCSI
devices have different ID number.
!!!!!
If you get a "Not Enough Memory" message: If you get a "Not Enough Memory" message:
If you get a "Not Enough Memory" message: If you get a "Not Enough Memory" message:
If you get a "Not Enough Memory" message:
1. Make sure you have enough free space on
your hard drive.
2. Click on the "Reset" "Reset" "Reset" "Reset" "Reset" button in Vividscan Twain
driver..
3. Lower the resolution or select a smaller scan-
ning area.
!!!!!
How do I use IMS Shell? How do I use IMS Shell?
How do I use IMS Shell? How do I use IMS Shell?
How do I use IMS Shell?
Please refer to Appendix page A-5 to A-12 of
the User Guide. For more information please
use IMS Shell's online help or visit
www.giv.com.tw.
!!!!!
How do I get 30-bit images? How do I get 30-bit images? How do I get 30-bit images? How do I get 30-bit images? How do I get 30-bit images?
The 30-bit scanner captures over a billion colors
to give you the most accurate details in high-
lights and shadows. The image is then optimized
to a 24-bit image file for the Windows 95 oper-
ating system.
!!!!!
If the images look blurry or have white lines: If the images look blurry or have white lines:
If the images look blurry or have white lines: If the images look blurry or have white lines: If the images look blurry or have white lines:
1. Set Display Properties to High Color (16-bit).
2. Allow 3 minutes for scanner to warm up.