-
13
-
www.SCEPTRE.com
SCEPTRE E245 HDTV User Manual
Rear View Connections
1.
Video
– Video connects to devices that use composite video cables
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio.
This port shares the audio jacks
with YPbPr.
2.
YPbPr
– This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio.
This port shares the
audio jacks with Video.
3.
Audio In
- This connection port is for people who want to provide
audio to the TV when using a PC or a DVI video device. The sources
use 3.5mm mini-jack audio cable.
4.
VGA
- This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
5.
SPDIF
- This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital optical input.
6.
TV
– This connection is for analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF
cable. For over-the airwave digital stations please check
http://www.antennaweb.org
.
This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.