Chapter 1
— 4 —
The AC Connection
♦
=
Locate the AC port on the rear of the monitor (refer to
Figure 3
).
♦
=
Plug the female end of the AC cord into the AC port.
♦
=
Plug the male end into the power supply.
Figure 3: Connecting the Power Cord
The Signal Cable Connection
♦
=
Make sure that the monitor is powered
Off
. When powered off the Power LED
(see
Figure 2
) will not be lit.
♦
=
Locate the VGA port on the rear of the PC. The signal cable has a standard 15-
pin mini D-sub (VGA) connector. If you are having trouble locating the VGA
port, please refer to the documentation, which came with your PC.
♦
=
Connect the Signal cable to the PC’s VGA port.
Figure 4: Connecting the Signal Cable
Содержание D73P
Страница 4: ......
