SCENTYS PACK COSY STANDALONE, Руководство пользователя

Страница: 15 / 34

11/16
MKT/DOC/137/V0
10/16
MKT/DOC/137/V0
Precautions during installation
n
The compressed air tube connecting the pump to the S’Point 150 horizontal/vertical
should not be longer than 25 m. The tube provided is blue and 5 m long.
n
Air exchange in the room into which the fragrance will be diffused must be at least 60m
3
/h.
n
The S’Point 150 must remain accessible so the fragrance bottle can be replaced.
n
The supporting structure and screws used to attach the S’Point 150 horizontal/vertical
must be able to support 5 kg.
Installation steps
1. Create an opening to allow for fragrance diffusion. This requires:
a. Drilling a 114 mm hole;
b. Drilling an 82 mm x 82 mm hole.
2. Put the S’Point 150 horizontal/vertical in place in such a way as to line up the diffusion
vent with the hole drilled in step 1:
a. Against a vertical surface if installing the Pack Cosy Horizontal;
b. Against a horizontal surface if installing the Pack Cosy Vertical. Ensure that the
S’Point 150 horizontal/vertical is secured by the safety rope provided.
3. Put the pump into place near the S’Point 150 horizontal/vertical, as indicated in the
R’Pulse 150 user manual included with the product.
4. Pneumatically connect the pump to the S’Point 150 horizontal/vertical with the blue
tube provided.
5. Electrically connect the pump to the S’Point 150 horizontal/vertical using the
cable provided.
6. Insert the diffusion grille in the diffusion vent from the outside and screw the diffusion
grille into place using the three 3 mm screws provided.
7. Place the aesthetic ring on the diffusion grille using the three 2.5 mm screws provided.
I
NSTALLATION
n
Dowels for mounting
n
Screws / threaded rods
n
Set of hex wrenches
n
Cutting pliers
n
Cable ties
(for tubes and wires)
T
OOLS
R
EQUIRED FOR
I
NSTALLATION
Diffusion grille
Aesthetic ring
(to hide the screws)
Diffusion grille
A video showing how the Pack Cosy Standalone is installed
is available on YouTube: https://youtu.be/eJEaafQU0FI