12
RUN MODE
The
ScentWave
has alternate run modes to
temporarily change the way the system will perform
without editing the details of a Scent Event.
Under normal operation a bar is shown under
SCENT EVENT. There are two EVENT OVERRIDE
modes called PAUSE and RUN.
You can change the current run mode by pressing
CLOCK and CHECK at the same time. A black
bar will appear on the display screen under the
currently selected mode.
SCENT EVENT:
This indicates that the
ScentWave
is currently set-up
to function under a preset event schedule. (
Fig.7
)
EVENT OVERRIDE:
The
ScentWave
preset events can be temporarily
overridden without editing the events by changing
the current run mode.
•
PAUSE: During an active event, PAUSE
mode will cause the system to stop running
for the remainder of the current Scent
Event. (
Fig.8
)
•
RUN: When the
ScentWave
is not running
an event, selecting RUN will cause the
system to activate immediately at the
currently selected Scent Level. (
Fig.9
)
SCENT
EVENT
PAUSE
RUN
EVENT OVERRIDE
EVENT
SETTINGS
NEXT
DIGIT
RUN
MODE
SCENT
EVENT
PAUSE
RUN
EVENT OVERRIDE
EVENT
SETTINGS
NEXT
DIGIT
RUN
MODE
Fig.7:
This is the default screen when running a
scheduled Scent Event.
Fig.8:
Activating the PAUSE mode before a scheduled
event will cause the system to skip the next event.
Fig.9:
The system will run until the Off Time of the
next Scent Event. If the system is running an event,
RUN mode will force the event to continue beyond its
scheduled Off Time.
SCENT
EVENT
PAUSE
RUN
EVENT OVERRIDE
EVENT
SETTINGS
NEXT
DIGIT
RUN
MODE
