8
PART#-31600035-LIT-SXD2110-MANUAL-REV.A
SYSTEM CONTROL UNIT
Button Functions
First, connect the SXD2110 system to the closest available power source. Check that the
power supply has a lit green light indicating the system is powered.
•
MODE (EXIT): Moves through the seven (7) set up screens. Each setup screen has the
word
”Set”
illuminated in addition to other key words that help identify which screen
you are in. In order, the modes are:
Main
,
Set Event
,
Set Time
,
Set Pump
,
Set DST
and
Set Lockcode
. MODE (EXIT) is also used to exit a setting
without
saving changes.
•
PREVIOUS / NEXT: Used for navigating through the setup screens and options.
•
UP / DOWN: Push to make changes within specific setup options.
•
SELECT (OVERRIDE): Push to make changes at any of the setup screens, use this button
to enter the edit mode for specific features. In edit mode, a number, ON/OFF toggle,
or day of the week will begin to blink indicating that it can be changed with the UP and
DOWN buttons. To save any changes made you must press the SELECT (OVERRIDE)
button. Each time you save a change, the screen backlight will flash to confirm the
setting was saved.
LCD Display
Pressing any button will turn the backlight on and activate the screen. The backlight must
be on in order to perform any of the operations described in this manual. If left alone for
two minutes, the backlight will turn off and the machine will return to the main screen. All
button presses are made as “clicks”. Holding down keys is never required. Once the system
is turned on the first screen that will show is the main screen displaying the current time and
day of the week. Below are functions commonly displayed on the screen and their purpose.
•
Auto
- Indicates that the machine is currently setup to run at specified days and times.
Automatic operation can be temporarily overridden as described in section “System
Override – Manual Operation”.
•
ON
- Displayed during the programmed events along with the specific
Event
number
at the left of the display. A circle will appear when the machine is actively emitting
fragrance.
OFF
indicates that the machine has been manually switched off until the
start of the next event or manual control change.
•
Lockcode
- Displayed when the controls have been protected with a password to
prevent tampering. The lockcode behavior is described in “Set Lockcode”.
•
HVAC
- Displayed unless optional attached sensor is indicating that the HVAC fan is
off.
GLOSSY
CLEAR
WINDOW
