background image

B

17

SAGINAW CONTROL & ENGINEERING  •  A/C USER MANUAL

back to top

19. Warranty / Limits of Liability

All goods manufactured by SCE shall be warranted to be free of defects in material or workmanship for a period of two years 

from the date of shipment. Should the product be proven to SCE to be defective, we shall option to repair or replace the 

product. At no time will SCE reimburse purchaser for unauthorized rework on any product.

Air Conditioners & Heat Exchangers are warranted on parts and service for a period of two years from the date of shipment 

by Saginaw Control and subject to the following conditions and exclusions:

All Goods must be installed and operated according to the following specifications: Maximum voltage variation no 

greater than plus or minus 10% of nominal rating; Maximum frequency variation no greater than plus or minus 3 

Hz. from nominal rating; Must not exceed minimum and maximum rated temperatures; Must not exceed (BTU/Hr) 

rating; Filters must be cleaned regularly; Must be installed and grounded in accordance with all relevant electrical 

and safety codes, as well as the National Electric Code and OSHA rules and regulations; Must be installed in a 

stationery application, free of vibration. 

Our  warranty  does  not  warranty  product  that  has  been  modified,  subjected  to  abuse,  negligence  in  operation  or 

maintenance, or if product is used in a manner that exceeds its designed capabilities and rating. 

Warranty related claims will be returned to the factory for evaluation and final disposition of the claim, any replacement parts 

will be invoiced at standard pricing and credit issued for the returned product.  If the product has been found to have been 

modified, subjected to abuse, negligence in operation or maintenance, or if product has been used in a manner that exceeds 

its designed capabilities and rating, credit may be reduced, denied or additional cost may be assessed and passed on to the 

purchaser, such as return freight.

Содержание ENVIRO-THERM SCE-AC3400B120V


















Отзывы: