Scarlett SC-CM33020, Инструкция по эксплуатации

Страница: 6 / 24

IM022
www.scarlett.ru SC-CM33020 6
•
Pour water into water tank, the water level should not exceed the “MAX” mark in the tank.
Then replace the water tank cover.
•
Note: the appliance is supplied with a detachable tank for easy cleaning, you can fill the tank
with water firstly, and then put the tank into the appliance.
•
Set steel mesh into metal funnel (no coffee in steel mesh).
•
Place a jug on removable shelf. Make sure the steam control knob is on the OFF position.
•
Note: the appliance is not equipped with jug, please use yourself jug or coffee cup.
•
Connect to power source, turn the ON/OFF switch to the “—” position. The lamp in itself will
be illuminated.
•
Turn the pump control switch to the “—” position, the pump will pump water, when there is
water flowing out and close the pump by pressing the pump control switch to “O”, pressing the
coffee/steam selector to the “O” position and waiting for a moment, the appliance begins to be
pre-heated until the inner lamp of pump control switch is illuminated, it shows the pre-heating
is finish. Pressing the pump control switch to “—” position again, and water will flow out.
•
After water not dropping out any more, you can pour the water in each container out then
clean them thoroughly, now you can start brewing.
•
Note: There may be noise when pump the water on the first time, it is normal, the appliance is
releasing the air in the appliance. After about 20s, the noise will disappear.
MAKE ESPRESSO COFFEE
•
Remove the funnel by turning it in clockwise. Add ground coffee to steel mesh with measuring
spoon, a spoon ground coffee power can make about a cup of top-grade coffee, then press
the ground coffee powder tightly with the tamper.
•
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance from the “Insert” position, and you can fix
them into coffee maker firmly through turn it anticlockwise until it is at the “Lock” position..
•
Pour out the hot water in the cup. Then place the hot cup (yourself cup) on removable shelf.
•
At the time, the lamp in pump control switch shall be illuminated, if it is extinguished, wait for a
moment, once the lamp in it is illuminated, you should press the pump control switch on the
“—” position, waiting for a moment, there will be coffee flowing out.
•
Note: During operation, if the indicator is extinguished, you must close the pump and stop to
make espresso coffee. After a few seconds, if the lamp is illuminated again, you can make
espresso coffee continued by pressing pump control switch to “—” position, the lamp is cycle
on and off to maintain the water temperature is hot enough.
•
You should press ON/OFF switch to “O” position manually when desired coffee is obtained or
the colour of coffee changes weak obviously, all indicators go out and the coffee maker stops
working, your coffee is ready now.
•
WARNING: Do not leave the coffee maker unattended during making the coffee, as you need
operate manually sometimes!
•
After finishing making the coffee, you can take the metal funnel out through turn clockwise,
then pour the coffee residue out with the steel mesh pressed by press bar.
•
Let them cool down completely, then rinse under running water.
MAKE CAPPUCCINO COFFEE
•
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
•
Note: during making steam, the metal funnel must be assembled in position.
•
Prepare espresso first with container big enough according to the part “MAKE ESPRESSO
COFFEE”, make sure that the steam control knob is at the OFF position.
•
Press the coffee/steam selector to the “—” position, the lamp in the pump control switch will be
illuminated, waiting for until the indicator in the coffee/steam selector is illuminated.
•
Note: During operation, the indicator in the coffee/steam selector will be cycle on and off to
maintain to desired temperature.
•
Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you are
recommended to use whole milk at refrigerator temperature (not hot!).
•
Note: In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and
bear in mind that the milk increases in volume by 2 times, make sure the height of jug is
enough.