3
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
•
Please read all instruction manuals before use and save
it for future references.
•
For home use only. Do not use for industrial or
commercial purposes.
•
Do not shock the scale with sudden loading or striking.
•
Do not overload the scale.
•
Slippery when wet.
•
Do not attempt to repair, adjust or replace parts in the
appliance. Repair the malfunctioning appliance in the
nearest service center.
•
If the product has been exposed to temperatures below
0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on.
•
The manufacturer reserves the right to introduce minor
changes into the product design without prior notice,
unless such changes influence significantly the product
safety, performance, and functions.
OPERATING INSTRUCTIONS
START TO USE
•
Open the battery case on the bottom, remove the
protective film. Close the battery case on the bottom.
Scales are ready to work.
•
By default the scale is set to stones. There is a switch on
the rear panel of the scale, for selecting “kilos” or
“pounds” as units of measurement.
•
Make sure that the scale stands on flat even hard
horizontal surface. Do not place the scale on a carpet or
any other soft surfaces.
•
In order to determine the weight correctly, the scale
should stay in one place. By moving the scale you may
place it on an uneven surface, and it may affect the
correctness of the weight displayed.
WEIGHING
•
In order to determine the weight correctly, you should
weigh yourself at the same time during the day and
before meal. Do not forget to undress and take off your
shoes.
•
In order to determine the weight correctly try not to weigh
yourself earlier than 2 hours after waking up.
•
Step on the scale in order to turn it on.
•
Wait a few seconds until the display will show “0.0”.
•
The display will be locked when you stably stand on the
scale.
•
Step off the scale.
AUTOMATIC SWITCHING OFF
•
After weighing unloaded scale will automatically turn off
in 10 seconds.
OVERLOAD INDICATOR
•
When the scale is overloaded, the display shows “Err”.
BATTERY REPLACING
•
Replace the battery when the display shows “Lo”.
MAINTENANCE AND CARE
•
Wipe the scale with a soft cloth and cleaner, and then dry
it.
•
Do not use any organic solvents, aggressive chemicals
and abrasives.
STORAGE
•
Complete all requirements of chapter MAINTENANCE
AND CARE.
•
Do not put anything on bathroom scale when not in use.
•
Keep the scale in a dry cool place.
RUS
•
.
.
•
.
.
•
.
•
.
•
!
.
•
-
.
.
•
0ºC,
2
.
•
,
,
.
•
,
.
.
.
•
«kg».
,
«st»
«lb».
•
,
,
.
.
•
,
.
,
,
.
•
,
,
,
.
•
,
,
2
.
•
.
•
,
«0.0 ».
•
,
,
.
•
.
•
10
.
•
«
Err».
•
«
Lo
»,
.
•
.
