IM019
www.scarlett.ru
SC-SF111RC04
7
Қорғау торды, қалақтарды, тіректі және негізді дымқыл жұмсақ матамен және құрғақ содалы сумен сүртіңіз. Абразивті
тазалайтын заттарды қолданбаңыз.
САҚТАУ
Құрғақ орналастыруда нормалы шарттар жанында бұйымды сақтаңыздар.
Өнімдегі, қораптағы және/немесе қосымша құжаттағы осындай белгі қолданылған электрлік және электрондық
бұйымдар мен батарейкалар кәдімгі тұрмыстық қалдықтармен бірге шығарылмауы керек дегенді білдіреді. Оларды
арнайы қабылдау бөлімшелеріне өткізу қажет.
Қалдықтарды жинау жүйелері туралы қосымша мәліметтер алу үшін жергілікті басқару органдарына хабарласыңыз.
Қалдықтарды дұрыс кәдеге жарату бағалы ресурстарды сақтауға және қалдықтарды дұрыс шығармау салдарынан
адамның денсаулығына және қоршаған ортаға келетін теріс әсерлердің алдын алуға көмектеседі.
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Important safeguards. read carefully and keep for future reference.
Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this
instruction manual.
Do not use outdoors.
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with
lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by
responsible person.
Children must be under control in order not to be allowed to play with the appliance.
Always unplug the appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT
TOUCH the appliance, unplug it immediately and check in a service center.
Do not use the device in bathrooms and near water.
Do not place the appliance near heat sources.
Do not leave the appliance switched on when not in use.
Do not use other attachments than those supplied.
In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-
skill person to avoid any danger.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around the appliance.
Avoid contact with moving parts of the device. Do not put pencils or other objects through the protective grid of the fan.
Do not operate without fan installed protective grid.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service
center.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2
hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such
changes influence significantly the product safety, performance, and functions.
Production date mentioned on the unit and/or on the packing materials and documentations.
ASSEMBLING INSTRUCTIONS:
The device is intended for air circulation in the room.
Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included into the set.
Do not plug in the device before its assembling is finished.
Tighten stand tube to stand base.
Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then tighten the out-joint
again.
Place control box firmly on top of extension pole, tighten screw B.
Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and put both blade cap and rear grill
nut off the motor shaft.
Put rear grille on motor shaft.
Secure it with rear grille nut.
Slide blades on motor shaft so that claws on motor shaft match the blades slots.
Screw blade cap on shaft by turning counter clockwise.
Put front grille on rear grille and close clips or screw grille ring to secure grilles together.
Adjust the fan vertically by vertical adjustment screw.
The fan is ready for work.
OPERATION MANUAL
CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the conditions of increased humidity.
Place fan only onto dry flat unyielding surface.
BUTTONS
On/Speed - button switches on the power.Speed button switches the fan on and shifts between different speeds.
Off - button switches the fan off.
Swing
–rotation mode.
