Scarlett Comfort SC-DF111S19, Инструкция по эксплуатации

Страница: 12 / 12

IM022
www.scarlett.ru SC-DF111S19 12

The manufacturer reserves the right to introduce minor
changes into the product design without prior notice, unless
such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing
as well as in accompanying documents in the following format
XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of
production.
ASSEMBLING INSTRUCTIONS

The device is intended for air circulation in the room.

Place fan basement onto flat horizontal surface. Tighten stand tube to stand base moving it
upward and downward and fix it with screws.

Unscrew the blade cap by turning clockwise and rear guard mounting nut by turning counter
clockwise. Put rear grille on motor shaft so that two claws on motor cover match two holes on
grille and secure with guard nut.

Slide blades on motor shaft so that claws on motor shaft match the blades slots. Screw blade
cap on shaft by turning counter clockwise, otherwise the fan will sound abnormal and may be
broken while operate.

Put front grill on rear grille and close clips or screw grill ring to secure grilles together.
CAUTION: Do not plug in the device before its assembling is finished.

Do not operate the appliance with damaged blades.
OPERATION MANUAL

CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the
conditions of increased humidity
for example do not use it outdoors when it’s raining.

Place fan only onto dry flat unyielding surface.
FAN OPERATING MODES

Switch the fan on by pushing any of the buttons:
1-For minimum operational speed
2-For medium operational speed

To switch the fan off push the button “0”
OSCILLATING MODE (pic. 1)

On the upper part of the motor cover there is oscillating knob. If pressed, it makes the fan
cabinet with blades traverse from side to side with the angle 90
o
. To cancel oscillating mode
push oscillating knob upward.
VERTICAL ADJUSTMENT(pic.2.)

Air flow direction can be changed by adjusting fan control box in a higher or lower position by
a vertical adjustment screw.
MAINTENANCE

Before cleaning unplug fan first. Do not use abrasive cleansers, gasoline, solvents or other
aggressive detergents

Unfix clips on grille or unscrew grille ring and take off front grille. Clean the fan and blades with
soft cloth moistened with soap solution.
STORAGE

Keep the device in dry cool place.
It is recommended to keep and to use for seasonal storage the original carton box of the
appliance.
The symbol on the unit, packing materials and/or documentations means used electrical
and electronic units should not be toss in the garbage with ordinary household garbage. These
units should be pass to special receiving point.
For additional information about actual system of the garbage collection address to the local
authority.
Valid utilization will help to save valuable resources and avoid negative work on the public
health and environment which happens with incorrect using garbage.