D
ISPLAY
M
ESSAGES
20
19
CANNOT RESET
System is unable to reset due to a fault existing. Check as
necessary or call engineer.
TELEPHONE
FAILED
Telephone line fault, call alarm company engineer to
check system.
24 HOUR ALARM
A zone programmed as 24 hour alarm has been violated,
display will show description. Check system as necessary.
PERSONAL
ATTACK
A personal attack button fitted to the system has been acti-
vated.
EXIT FAULT
User has exceeded the programmed exit time or a fault exists
with the detection on exit route, check as necessary or call
engineer.
ZONE TEST FAILED
A zone which the engineer has programmed for 14 day test has
been violated. Call engineer to check system.
CALL ENGINEER
Call alarm company engineer to check system.
INVALID CODE
Incorrect user code has been entered, re-try up to 4 times before
tamper alarm will occur.
LOW BATTERY
Stand-by battery is low, call alarm company engineer to check
system.
MAINS FAILED
240v main supply to control panel lost, check fuse board or spur
outlet. Call engineer to check if required.
SYSTEM FAULT
Fault within control panel, call engineer to check system.
SYSTEM RESET
System has successfully reset, all wiring and circuits are
correct.
TAMPER FAULT
System anti-tamper switch opened or damage to wiring has
occured. Call engineer to check system.
FIRE
A smoke or heat detector fitted to the system has been acti-
vated.
PRINTER FAULT
The logging printer has been disconnected, de-selected or has
run out of paper. Call engineer to check system.
